ONE-POINT-ROTATION VISIBLE CAM
HINGE
The one-point-rotation visible cam hinge developed
by our company has been produced since its creation
in 1968.
The principal feature of this type of hinge is its
rotation round a fulcrum whose co-ordinates are established
on the basis of the customer’s requirements.
This type of reliable and economical hinge is preferred
when:
- there is not a full-width oven door glass
- there are no problems of overall dimension during
the movement of opening of the door.
The one-point-rotation visible cam hinge envisages
the application of a support with a roller inside
the oven frame, on which the cam slides; the use of
various different cam profiles allows the creation
of different opening forces and grill positions as
required.
This hinge, which conforms to the specification of
the VDE standard,
permits oven door removal by means of a latching device
and is suitable for balancing doors weighing up to12
kg, having a minimum overall dimension inside the
door of 24.5 mm.
Some examples of these hinges are given on the diagrams
showing the following types:
Hinge
with fulcrum at x=16mm y=6mm
Hinge
with fulcrum at x=18mm y=6.5mm
Hinge
with fulcrum at x= 15.5mm y=6mm
